Polaris RZR 1000 skid plate
Availability: In Stock
Don't go out unprotected ---- Skid Up! When we buy a new Machine, the first thing we do is acc..
- Made in USA
- 100% UHMW SKID PLATES
- CNC cut with recessed hardware and overlap joints
- Uses OEM washers for protection
- All hardware is fully recessed ensuring that you will not snap off bolts or catch on objects
- All bends are pre-scored to ensure a clean fit
- Skid plates are engineered to add structure to the machine and not to benefit the shipping of the skid plate.
- Uses all stock mounting holes for the main body of the skid plate
- Overlap joints are designed to minimize hang-ups or tearing
- UHMW outwears aluminum 9 to 1
- UHMW is made to dampen road noise and gravel pinging
- Made from Recycled material
When we buy a new Machine, the first thing we do is accessorize and customize. We want to make our machine, well, ours. We search for the coolest accessories.
But too often, we fail to think about whatâs under our machine. The ATV manufacturers do a fairly good job of providing frame and under carriage protection for the average trail rider. We donât fear that root or rock on the trail because we are protected, right? Well maybe notâ¦
For the average ride, or especially for when we want to ride a more challenging trail or just want to hop a few rocks, we need to accessorize and protect our investment. Add the best possible frame protection available; a full ultra-high-molecular-weight polyethylene skid plate.
Why ultra-high-molecular-weight polyethylene?
Ultra-high-molecular-weight polyethylene has an extremely long chain of molecules, which allows for a strong bond. Polyethylene is a dependable polymer which outlasts steel, hardwoods and other plastics in wear applications. UHMW-PE is used extensively in the mining industry to protect steel in wear applications, for example, slurry piping.
UHMW-PE is very low friction, giving it a slick, non-stick quality. It allows clean, uninterrupted operation/flow in dry, wet and freezing conditions. Materials pass over without adhesion and buildup. Barnacles wipe away from UHMW.
SSS Off-Roads offers a cup washer to recede the bolt heads to minimize damage and keep the skip free of snags.
Because you want the best protection available- Skid Up!
WHAT IS UHMW:
Ultra-high-molecular-weight polyethylene (UHMW) is a subset of the thermoplastic polyethylene. Also known as high-modulus polyethylene,(HMPE), or high-performance polyethylene (HDPE), it has extremely long chains, with a molecular mass usually between 2 and 6 million u. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made. UHMW is odorless, tasteless, and nontoxic. It is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction; is self-lubricating; and is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel. Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of polytetrafluoroethylene (PTFE, Teflon), but UHMW has better abrasion resistance than PTFE. Its
melting point is around 130 to 136 deg C (266 to 277 deg F), and,according to DSM, it is not advisable to use UHMWPE fibers at temperatures exceeding 80 to 100 deg C (176 to 212 deg F) for long periods of time. It becomes brittle at temperatures below -150 deg C(-240 deg F). ALL REGIONS ALL TEMPERATURES, this is why SSS Off Road uses 100% UHMW.
If you want FULL PROTECTION and a product that will stand up in any REGION, make sure you buy a skid plate that is 100% UHMW and 100% made in the USA.