Our UHMW Skid Plates with Built-in Rock Sliders will give you the confidence and peace of mind to take on new trails.
Premium UHMW Skid Plate | Polaris RZR Pro XP 4
Premium UHMW Skid Plate | Polaris RZR Pro XP 4
Polaris RZR Pro XP 4
SSS Off-Road aftermarket skid plates are a must for all riders who value their investments. Our skids give you the confidence and peace of mind when you are tearing through the trails!
DRILLING AND TAPPINGWe use all the available factory holes. However, the OEM doesn't provide holes around the entire perimeter of the vehicle so there will be some areas that will require drilling/tapping.
FEATURES
3/8" thick UHMW
Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
Our lap joints interlock and create a flat surface, near seamless!
ROCK SLIDERS
Standalone Rock Sliders
Matches body line - 5.5 inches high in the front and 3.125 inches in the rear
Front Rock Sliders
Provides additional protection in the wheel well adds up to 5.5 inches of additional UHMW protection
Front Rockers and the body are the same piece
Snug to machine
PREMIUM vs STANDARD SKID PLATE The primary difference is the amount of pieces the skid plate contains. This provides stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
Premium: 4 pieces total
Small front differential panel (1)
MASSIVE main panel (x2)
Small engine/transmission panel (1)
Standard: 6 pieces total ( go to Standard page )
Small front differential panel (1)
4-part main panel (4)
Small engine/transmission panel (1)
The Premium skid plate allows for full peace of mind on the trail.
Shipping
The Premium skid plate ships via LTL and may cause certain residential addresses to be restricted or unavailable. Our team will coordinate with you prior to shipping if there are any issues with the shipping address you provide.
The primary difference is the amount of pieces the skid plate contains. This provides stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
The primary difference is the amount of pieces the skid plate contains. This provides stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
,
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
3/8th" UHMW performs great with the right features
Premium UHMW Skid Plate | Polaris RZR Pro XP 4
Price: $1,311.00
Free Shipping Included - Ships 1-3 Business Days
Need Help?
-
American Made
-
Accurate Fit
-
Workmanship Guarantee
SSS Off-Road aftermarket skid plates are a must for all riders who value their investments. Our skids give you the confidence and peace of mind when you are tearing through the trails!
DRILLING AND TAPPING
We use all the available factory holes. However, the OEM doesn't provide holes around the entire perimeter of the vehicle so there will be some areas that will require drilling/tapping.
FEATURES
- 3/8" thick UHMW
- Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
- Our lap joints interlock and create a flat surface, near seamless!
- Standalone Rock Sliders
- Matches body line - 5.5 inches high in the front and 3.125 inches in the rear
- Front Rock Sliders
- Provides additional protection in the wheel well adds up to 5.5 inches of additional UHMW protection
- Front Rockers and the body are the same piece
- Snug to machine
The primary difference is the amount of pieces the skid plate contains. This provides stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
- Premium: 4 pieces total
- Small front differential panel (1)
- MASSIVE main panel (x2)
- Small engine/transmission panel (1)
-
Standard: 6 pieces total ( go to Standard page )
- Small front differential panel (1)
- 4-part main panel (4)
- Small engine/transmission panel (1)
SSS Off-Road aftermarket skid plates are a must for all riders who value their investments. Our skids give you the confidence and peace of mind when you are tearing through the trails!
DRILLING AND TAPPING
We use all the available factory holes. However, the OEM doesn't provide holes around the entire perimeter of the vehicle so there will be some areas that will require drilling/tapping.
FEATURES
- 3/8" thick UHMW
- Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
- Our lap joints interlock and create a flat surface, near seamless!
- Standalone Rock Sliders
- Matches body line - 5.5 inches high in the front and 3.125 inches in the rear
- Front Rock Sliders
- Provides additional protection in the wheel well adds up to 5.5 inches of additional UHMW protection
- Front Rockers and the body are the same piece
- Snug to machine
The primary difference is the amount of pieces the skid plate contains. This provides stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
- Premium: 4 pieces total
- Small front differential panel (1)
- MASSIVE main panel (x2)
- Small engine/transmission panel (1)
-
Standard: 6 pieces total ( go to Standard page )
- Small front differential panel (1)
- 4-part main panel (4)
- Small engine/transmission panel (1)
The Premium skid plate ships via LTL and may cause certain residential addresses to be restricted or unavailable. Our team will coordinate with you prior to shipping if there are any issues with the shipping address you provide.
Our Design Principles
We follow similar design principles for each of our UHMW Skid Plates. Below are some of our key features. Some of the below features may not apply to the product shown above.
Optional Built-in Rock Sliders
Unmatched Premium Features
What is UHMW?
What does UHMW stand for?
UHMW-PE stands for Ultra-High Molecular Weight Polythene.
UHMW vs HMW?
UHMW has more than 10x the molecular weight than it's little brother HMW (some might call it ARMW). This is what gives UHMW it's superior impact strength, abrasion resistance, stress/crack resistance, and more! This makes it very important to prioritize material type/authenticity over material thickness.
Genuine UHMW
We only supply genuine American made UHMW-PE.
We believe some products pose as UHMW based but are not made from UHMW. Some material descriptions that we believe you should be aware of are:
- "Proprietary blend of UHMW" (most likely HDPE or HMW)
- HMW (less than 10x the molecular weight of UHMW)
- ARMW (most likely HMW)
Why we don't use colored UHMW
UHMW colors are very limited and primarily used for utility applications, not cosmetic applications. This means that color shades can have significant variations from sheet-to-sheet and will not be matched to a specific Pantone (color matching system). If you have seen cool colored plastics, they are most likely not UHMW because of the inability to color match.
Factory Skids Don't Cut it
Unleash Your Machine
Don't just take our word for it!
Take on New Trails
Peace of Mind
Don't worry about the rocks. UHMW allows you to glide over obstacles without a problem
King of the Hammers Survivor
Zbroz Racing ran our 3/8th inch full body skid plate with Built-in Rock Sliders
3/8th" UHMW performs great with the right features
Our features make the difference:
✓ Near single piece design
✓ Flush lap joint with countersink holes
✓ Built-in Rock Sliders
✓ Additional strategic fastening points
