Our UHMW Skid Plates with Built-in Rock Sliders will give you the confidence and peace of mind to take on new trails.
Standard UHMW Skid Plate | Can-Am Maverick Trail
-
American Made
-
Accurate Fit
-
Workmanship Guarantee
SSS Off-Road aftermarket skid plates are a must for all UTV enthusiasts who value their investments—the people they ride with as well as their machines. Factory skid plates do not do an outstanding job in giving you peace of mind when you are out doing what you enjoy the most.
Don’t RIDE unprotected! SKID UP with an SSS Off-Road skid plate!
FEATURES
- 3/8" Thick Material - no need for the extra weight or cost of 1/2" material
- Genuine UHMW-PE (Ultra High Molecular Weight Polyethylene) , not disc
- Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
- Lap joints interlock for a full under body coverage that is seamless and reduces the chances of something catching
- Optional Feature - Built-in Rock Sliders: 2.25" lip (on the side, front or both) built-in to the main skid piece that provides extra protection to the machine frame
PREMIUM vs STANDARD SKID PLATE
The primary difference is the amount of pieces the skid plate contains. This provide stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
- Standard: 5 pieces total
- Small front differential panel (1)
- 3-part main panel (3)
- Small engine/transmission panel (1)
- Premium: 3 pieces total ( go to Premium page)
- Small front differential panel (1)
- MASSIVE main panel (1)
- Small engine/transmission panel (1)
The Premium skid plate allows for full peace of mind on the trail.
SSS Off-Road aftermarket skid plates are a must for all UTV enthusiasts who value their investments—the people they ride with as well as their machines. Factory skid plates do not do an outstanding job in giving you peace of mind when you are out doing what you enjoy the most.
Don’t RIDE unprotected! SKID UP with an SSS Off-Road skid plate!
FEATURES
- 3/8" Thick Material - no need for the extra weight or cost of 1/2" material
- Genuine UHMW-PE (Ultra High Molecular Weight Polyethylene) , not disc
- Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
- Lap joints interlock for a full under body coverage that is seamless and reduces the chances of something catching
- Optional Feature - Built-in Rock Sliders: 2.25" lip (on the side, front or both) built-in to the main skid piece that provides extra protection to the machine frame
PREMIUM vs STANDARD SKID PLATE
The primary difference is the amount of pieces the skid plate contains. This provide stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.
- Standard: 5 pieces total
- Small front differential panel (1)
- 3-part main panel (3)
- Small engine/transmission panel (1)
- Premium: 3 pieces total ( go to Premium page)
- Small front differential panel (1)
- MASSIVE main panel (1)
- Small engine/transmission panel (1)
The Premium skid plate allows for full peace of mind on the trail.
The Premium skid plate ships via LTL and may cause certain residential addresses to be restricted or unavailable. Our team will coordinate with you prior to shipping if there are any issues with the shipping address you provide.
Our Design Principles
We follow similar design principles for each of our UHMW Skid Plates. Below are some of our key features. Some of the below features may not apply to the product shown above.
Optional Built-in Rock Sliders



Unmatched Premium Features






What is UHMW?
What does UHMW stand for?
UHMW-PE stands for Ultra-High Molecular Weight Polythene.
UHMW vs HMW?
UHMW has more than 10x the molecular weight than it's little brother HMW (some might call it ARMW). This is what gives UHMW it's superior impact strength, abrasion resistance, stress/crack resistance, and more! This makes it very important to prioritize material type/authenticity over material thickness.




Genuine UHMW
We only supply genuine American made UHMW-PE.
We believe some products pose as UHMW based but are not made from UHMW. Some material descriptions that we believe you should be aware of are:
- "Proprietary blend of UHMW" (most likely HDPE or HMW)
- HMW (less than 10x the molecular weight of UHMW)
- ARMW (most likely HMW)
Why we don't use colored UHMW
UHMW colors are very limited and primarily used for utility applications, not cosmetic applications. This means that color shades can have significant variations from sheet-to-sheet and will not be matched to a specific Pantone (color matching system). If you have seen cool colored plastics, they are most likely not UHMW because of the inability to color match.
Factory Skids Don't Cut it





Unleash Your Machine
Don't just take our word for it!
Take on New Trails
Peace of Mind
Don't worry about the rocks. UHMW allows you to glide over obstacles without a problem
King of the Hammers Survivor
Zbroz Racing ran our 3/8th inch full body skid plate with Built-in Rock Sliders
3/8th" UHMW performs great with the right features
Our features make the difference:
✓ Near single piece design
✓ Flush lap joint with countersink holes
✓ Built-in Rock Sliders
✓ Additional strategic fastening points