Standard UHMW Skid Plate | Polaris RZR Pro R 4 Standard UHMW Skid Plate | Polaris RZR Pro R 4 Polaris RZR Pro R 4 SSS Off-Road aftermarket skid plates are a must for all riders who value their investments. Our skids give you the confidence and peace of mind when you are tearing through the trails! DRILLING AND TAPPINGWe use all the available factory holes. However, the OEM doesn't provide holes around the entire perimeter of the vehicle so there will be some areas that will require drilling/tapping. FEATURES 3/8"" thick UHMW Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish Our lap joints interlock and create a flat surface, near seamless! ROCK SLIDERS Standalone Rock Sliders Matches body line - 5.5 inches high in the front and 3.125 inches in the rear Front Rock Sliders Provides additional protection in the wheel well adds up to 5.5 inches of additional UHMW protection Front Rockers and the body are the same piece Snug to machine PREMIUM vs STANDARD SKID PLATES The primary difference is the amount of pieces the skid plate contains. This provide stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole. Standard: 6 pieces total Small front differential panel (1) 4-part main panel (4) Small engine/transmission panel (1) Premium: 1 piece total (go to Premium page) Small front differential panel (1) 1 MASSIVE main panel (1) Small engine/transmission panel (1) The Premium skid plate allows for full peace of mind on the trail. Shipping The Premium skid plate ships via LTL and may cause certain residential addresses to be restricted or unavailable. Our team will coordinate with you prior to shipping if there are any issues with the shipping address you provide.
Polaris RZR Pro R 4

Standard UHMW Skid Plate | Polaris RZR Pro R 4

Standard UHMW Skid Plate | Polaris RZR Pro R 4
Price: $1,216.00
In-stock - Limited Availability
Free Shipping Included - Ships 1-3 Business Days
Need Help?

  • American Made

  • Accurate Fit

  • Workmanship Guarantee

SSS Off-Road aftermarket skid plates are a must for all riders who value their investments. Our skids give you the confidence and peace of mind when you are tearing through the trails!

DRILLING AND TAPPING
We use all the available factory holes. However, the OEM doesn't provide holes around the entire perimeter of the vehicle so there will be some areas that will require drilling/tapping.

FEATURES
  • 3/8"" thick UHMW
  • Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
  • Our lap joints interlock and create a flat surface, near seamless!
ROCK SLIDERS
  • Standalone Rock Sliders
    • Matches body line - 5.5 inches high in the front and 3.125 inches in the rear
  • Front Rock Sliders
    • Provides additional protection in the wheel well adds up to 5.5 inches of additional UHMW protection
    • Front Rockers and the body are the same piece
    • Snug to machine

PREMIUM vs STANDARD SKID PLATES
The primary difference is the amount of pieces the skid plate contains. This provide stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.

  • Standard: 6 pieces total
    • Small front differential panel (1)
    • 4-part main panel (4)
    • Small engine/transmission panel (1)

The Premium skid plate allows for full peace of mind on the trail.

SSS Off-Road aftermarket skid plates are a must for all riders who value their investments. Our skids give you the confidence and peace of mind when you are tearing through the trails!

DRILLING AND TAPPING
We use all the available factory holes. However, the OEM doesn't provide holes around the entire perimeter of the vehicle so there will be some areas that will require drilling/tapping.

FEATURES
  • 3/8"" thick UHMW
  • Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
  • Our lap joints interlock and create a flat surface, near seamless!
ROCK SLIDERS
  • Standalone Rock Sliders
    • Matches body line - 5.5 inches high in the front and 3.125 inches in the rear
  • Front Rock Sliders
    • Provides additional protection in the wheel well adds up to 5.5 inches of additional UHMW protection
    • Front Rockers and the body are the same piece
    • Snug to machine

PREMIUM vs STANDARD SKID PLATES
The primary difference is the amount of pieces the skid plate contains. This provide stronger reinforcement to the bottom of the machine, reduces snag points, and reduces the chance of your skid plate being torn off if you lose a bolt hole.

  • Standard: 6 pieces total
    • Small front differential panel (1)
    • 4-part main panel (4)
    • Small engine/transmission panel (1)

The Premium skid plate allows for full peace of mind on the trail.

The Premium skid plate ships via LTL and may cause certain residential addresses to be restricted or unavailable. Our team will coordinate with you prior to shipping if there are any issues with the shipping address you provide.

    ,

    Our Design Principles

    We follow similar design principles for each of our UHMW Skid Plates. Below are some of our key features. Some of the below features may not apply to the product shown above.

    Optional Built-in Rock Sliders

    Same Piece

    Built into the main panel

    Blends in

    Snug fit, black, single piece

    Unmatched Premium Features


    Minimum Pieces

    Less snags, better durability.
    Most only contain 3-5 pieces

    Forms to Machine

    If the machine has angles,
    we follow them

    Flush Lap Joints

    Near seamless with counter sink holes

    Countersink Holes

    Every hole

    Factory Holes Reused

    We reuse all pre-tapped holes by the factory
    to make it easier to install

    High Quality Hardware

    Custom Cup Washers provide
    extra protection

    What is UHMW?

    What does UHMW stand for?

    UHMW-PE stands for Ultra-High Molecular Weight Polythene. 

    UHMW vs HMW?

    UHMW has more than 10x the molecular weight than it's little brother HMW (some might call it ARMW). This is what gives UHMW it's superior impact strength, abrasion resistance, stress/crack resistance, and more! This makes it very important to prioritize material type/authenticity over material thickness.

     

    High Impact Strength

    - Absorbs impacts
    - Bounces back to original shape

    Extremely Quiet

    Significantly dampens impact noise

    Self Lubricating/High Abrasion Resistance

    - Easily slide over rocks and logs
    - Outwears carbon steel 10:1, great for sand

    Light-Weight

    - Lighter than aluminum
    - Very similar weight to HDPE
    (Factory/OEM material)

    Genuine UHMW

    We only supply genuine American made UHMW-PE.

    We believe some products pose as UHMW based but are not made from UHMW. Some material descriptions that we believe you should be aware of are:

    • "Proprietary blend of UHMW" (most likely HDPE or HMW)
    • HMW (less than 10x the molecular weight of UHMW)
    • ARMW (most likely HMW)

    Why we don't use colored UHMW

    UHMW colors are very limited and primarily used for utility applications, not cosmetic applications. This means that color shades can have significant variations from sheet-to-sheet and will not be matched to a specific Pantone (color matching system). If you have seen cool colored plastics, they are most likely not UHMW because of the inability to color match.

    Factory Skids Don't Cut it



    Limited Coverage

    Most Factory/OEM skids
    provide minimal protection

    Too Thin or Too Thick

    - 1/8th easily breaks
    - 1/2 inch adds unnecessary weight

    Weak Plastic

    Easily Cracks, Punctures, or Breaks

    Too Many Holes

    Needless holes add snag points

    Unleash Your Machine

    Don't just take our word for it!

    Take on New Trails

    Our UHMW Skid Plates with Built-in Rock Sliders will give you the confidence and peace of mind to take on new trails.

    Peace of Mind

    Don't worry about the rocks. UHMW allows you to glide over obstacles without a problem

    King of the Hammers Survivor


    Zbroz Racing ran our 3/8th inch full body skid plate with Built-in Rock Sliders

    3/8th" UHMW performs great with the right features

    Our features make the difference:
    ✓ Near single piece design
    ✓ Flush lap joint with countersink holes
    ✓ Built-in Rock Sliders
    ✓ Additional strategic fastening points