Trailing Arm Sliders | UHMW | Kawasaki Teryx KRX 1000-4 Trailing Arm Sliders | UHMW | Kawasaki Teryx KRX 1000-4 Kawasaki Teryx KRX 1000-4 SSS Off-Road arm protectors are a must for all UTV enthusiasts who value their investments—the people they ride with as well as their machines. They complement factory and aftermarket skid plates alike, to provide you that full protection when you are out doing what you enjoy the most. FEATURES Trailing Arm Slider 1/2" Thick, 100% UHMW Tap 3 factory pre-drilled holes, no drilling required Protects bottom of trailing arm Front Arm Guards (go to product page) 3/8" Thick 100% UHMW  Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish No drilling or tapping Wrap Around Arm Guards (go to product page) 3/8" Thick, 100% UHMW No drilling or tapping Protects bottom and side of trailing arm Compatibility & Dimensions PRODUCT TYPE WEIGHT DIMENSIONS FRONT ARM GUARDS 8 lbs. 22x14x5 REAR TRAILING ARMS 5 lbs. 35x6x3 ARM SET 13 lbs. 35x14x5    Available Models and Years 19-23+ Kawasaki Teryx KRX 1000 Compatibility Notes Call or send us a message if you have any fitment questions.
Kawasaki Teryx KRX 1000-4

Trailing Arm Sliders | UHMW | Kawasaki Teryx KRX 1000-4

Trailing Arm Sliders | UHMW | Kawasaki Teryx KRX 1000-4
Price: $163.00
In-stock - Limited Availability
Free Shipping Included - Ships 1-3 Business Days
Need Help?

  • American Made

  • Accurate Fit

  • Workmanship Guarantee

SSS Off-Road arm protectors are a must for all UTV enthusiasts who value their investments—the people they ride with as well as their machines.

They complement factory and aftermarket skid plates alike, to provide you that full protection when you are out doing what you enjoy the most.

FEATURES

  • Trailing Arm Slider
    • 1/2" Thick, 100% UHMW
    • Tap 3 factory pre-drilled holes, no drilling required
    • Protects bottom of trailing arm
  • Front Arm Guards (go to product page)
    • 3/8" Thick 100% UHMW 
    • Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
    • No drilling or tapping
  • Wrap Around Arm Guards (go to product page)
    • 3/8" Thick, 100% UHMW
    • No drilling or tapping
    • Protects bottom and side of trailing arm

SSS Off-Road arm protectors are a must for all UTV enthusiasts who value their investments—the people they ride with as well as their machines.

They complement factory and aftermarket skid plates alike, to provide you that full protection when you are out doing what you enjoy the most.

FEATURES

  • Trailing Arm Slider
    • 1/2" Thick, 100% UHMW
    • Tap 3 factory pre-drilled holes, no drilling required
    • Protects bottom of trailing arm
  • Front Arm Guards (go to product page)
    • 3/8" Thick 100% UHMW 
    • Recessed bolt holes for flushed hardware that allows for a smooth, no-snag finish
    • No drilling or tapping
  • Wrap Around Arm Guards (go to product page)
    • 3/8" Thick, 100% UHMW
    • No drilling or tapping
    • Protects bottom and side of trailing arm
PRODUCT TYPE WEIGHT DIMENSIONS
FRONT ARM GUARDS 8 lbs. 22x14x5
REAR TRAILING ARMS 5 lbs. 35x6x3
ARM SET 13 lbs. 35x14x5

 

 Available Models and Years

  • 19-23+ Kawasaki Teryx KRX 1000

Compatibility Notes

Call or send us a message if you have any fitment questions.

,

Our Design Principles

We follow similar design principles for each of our UHMW Skid Plates. Below are some of our key features. Some of the below features may not apply to the product shown above.

Optional Built-in Rock Sliders

Same Piece

Built into the main panel

Blends in

Snug fit, black, single piece

Unmatched Premium Features


Minimum Pieces

Less snags, better durability.
Most only contain 3-5 pieces

Forms to Machine

If the machine has angles,
we follow them

Flush Lap Joints

Near seamless with counter sink holes

Countersink Holes

Every hole

Factory Holes Reused

We reuse all pre-tapped holes by the factory
to make it easier to install

High Quality Hardware

Custom Cup Washers provide
extra protection

What is UHMW?

What does UHMW stand for?

UHMW-PE stands for Ultra-High Molecular Weight Polythene. 

UHMW vs HMW?

UHMW has more than 10x the molecular weight than it's little brother HMW (some might call it ARMW). This is what gives UHMW it's superior impact strength, abrasion resistance, stress/crack resistance, and more! This makes it very important to prioritize material type/authenticity over material thickness.

 

High Impact Strength

- Absorbs impacts
- Bounces back to original shape

Extremely Quiet

Significantly dampens impact noise

Self Lubricating/High Abrasion Resistance

- Easily slide over rocks and logs
- Outwears carbon steel 10:1, great for sand

Light-Weight

- Lighter than aluminum
- Very similar weight to HDPE
(Factory/OEM material)

Genuine UHMW

We only supply genuine American made UHMW-PE.

We believe some products pose as UHMW based but are not made from UHMW. Some material descriptions that we believe you should be aware of are:

  • "Proprietary blend of UHMW" (most likely HDPE or HMW)
  • HMW (less than 10x the molecular weight of UHMW)
  • ARMW (most likely HMW)

Why we don't use colored UHMW

UHMW colors are very limited and primarily used for utility applications, not cosmetic applications. This means that color shades can have significant variations from sheet-to-sheet and will not be matched to a specific Pantone (color matching system). If you have seen cool colored plastics, they are most likely not UHMW because of the inability to color match.

Factory Skids Don't Cut it



Limited Coverage

Most Factory/OEM skids
provide minimal protection

Too Thin or Too Thick

- 1/8th easily breaks
- 1/2 inch adds unnecessary weight

Weak Plastic

Easily Cracks, Punctures, or Breaks

Too Many Holes

Needless holes add snag points

Unleash Your Machine

Don't just take our word for it!

Take on New Trails

Our UHMW Skid Plates with Built-in Rock Sliders will give you the confidence and peace of mind to take on new trails.

Peace of Mind

Don't worry about the rocks. UHMW allows you to glide over obstacles without a problem

King of the Hammers Survivor


Zbroz Racing ran our 3/8th inch full body skid plate with Built-in Rock Sliders

3/8th" UHMW performs great with the right features

Our features make the difference:
✓ Near single piece design
✓ Flush lap joint with countersink holes
✓ Built-in Rock Sliders
✓ Additional strategic fastening points