Maverick R UHMW Premium 3 Piece Skid Plate

Key Features

  • 3/8" UHMW. Outwears steel 10:1
  • Aluminum Engine Bash Plate. .160" Aluminum
  • FLUSH HARDWARE. Recessed bolt holes for a smooth, no-snag finish
  • NO TAPPING. Our custom built cup washer and fasteners won't require you to tap while still using a 1pt (fine thread) screw
  • LAP JOINTS. Our lap joints interlock and create a flat surface, near seamless!
Built-in Rock Slider Options: Front Only (wheel well) Rockers

Built-in Rock Slider Options

Bash Plate: Aluminum Rear Bash Plate

Bash Plate

Year Model: 2025

Year Model

Sale price$999.00

Includes:

  • Small front differential panel (1)
  • MASSIVE 1 piece main panel (1)
  • UHMW and Aluminum Engine Transmission panel (2)
  • Hardware Kit (1)

Free Freight Shipping Disclaimer: Free shipping is limited to $200. If your zip code is hard to reach or your address requires special delivery, you may be contacted to arrange a different address. See shipping terms for more details

Best Features for Can-Am Maverick R Skid Plate

Best Features for Can-Am Maverick RSkid Plate

Material

UHMW and Aluminum Engine Bash Plate

Thickness

3/8th inch

Pieces

3 Pieces

Lap Joints

Flush Lap Joints

Drill & Tapping

No tapping, 4 holes to drill in front differential section

Hardware

Included - Custom Hardware, provides a flush finish and corrosion resistant

Can-Am Maverick R UHMW Skid Plate

Highlights

Our Maverick R Skid Plate offers the best protection, material, and fit/finish. This comes with an unbeatable lifetime warranty that only a tried and tested company could offer!

    • 3/8 inch thick UHMW 
    • Recessed bolt holes - smooth, no-snag finish
    • Miter Lap joints - near seamless
    • .160" Aluminum Engine Bash Plate included at no additional charge 
    • Only 3 pieces, Massive 1 Piece Main Panel
    • Optional: Separate rock sliders that fit between the frame and the skid

We are 100% USA made - from our equipment and materials to designing and manufacturing our product

 

UHMW is Best Material for a Maverick R Skid Plate

Genuine UHMW Skid Plate

UHMW is the hands down best material for Sport UTVs. Our 3/8ths inch UHMW skid protects the entire underside of the Maverick R.

UHMW-PE stands for Ultra-High Molecular Weight Poly-Ethylene. To learn more about UHMW, go to our UHMW section at the bottom of the page.

We love UHMW skid plates because they are:

  • Extremely Slick
  • Extremely hard to degrade
  • Absorb massive impacts (saves frame and engine damage)

Don't settle for imposter plastic.

Aluminum Engine Bash Plate (Free!)

The engine of the Mav R is the most expensive and vulnerable section in the vehicle. To ensure the engine has the protection it deserves, we added a bash plate that is sandwiched between the frame and the UHMW. This ensures you get the rigidity, impact protection, and slickness required for all types of driving. 

This combo gives you the optimal protection you need without adding unnecessary weight or cost. This thickness wins in the toughest terrain and the highest speeds. 

 

Great Fit and Finish of UHMW Skid Plates

Our Maverick R Skid Plate is designed to blend into your vehicle and provide safety features that are redundant and durable so you only have to buy one skid plate for the life of your Mav R.

Increased Redundancy with Full Lap Joints 

Our miter lap joints create flush overlapping panels with a near seamless finish in order to reduce catch points

Don't settle for companies that use high risk butt joints!

1-Piece Main Panel Skid Reduces Your Risk

Our Maverick R Skid Plate has 1 massive main panel which reduces the chance of catching, tearing off, or hanging down. Our tail is reinforced with an aluminum bash plate making it nearly impenetrable.

Slide With UHMW Rock Sliders 

Our proprietary Rock Sliders for the Maverick R Skid create a snug fit between the rocker and the Mav R body. This means it forms to the angle of the machine, not the standard 90 degree angle. 

Option to be have the rockers built into the skid plate


Installation and Maintenance of the Maverick R Skid Plate 

Easiest Install

No tapping required on the Maverick R skid plate! We reuse all available factory holes. SSS Offroad custom made fasteners are fine threaded screw that automatically tap pre-drilled holes. The fine threads are very important because the frame tubing is so thin. 

Premium Hardware

We use the best corrosion resistant coating available so that no matter the environment, your hardware will stand up.

Our Maverick R Skid uses fine threaded screws so you get the most thread contact on each mounting point with a steel rounded cup washers. This creates even more protection and enables a tighter hold than a standard bolt-to-plastic connection. 

Maintenance is Easy for a UHMW Skid

We include essential drain and maintenance holes. If an area is serviced less than once a year, we do not include it and recommend removing the panel to clean and service.

 

Why Buy a UHMW Skid Plate From SSS Offroad?

  • Made in USA. We design, test, and manufacturer your product in-house in Utah. We also source our materials from US manufacturers.
  • Buy once, cry once warranty. Damage or wear out a piece of your skid? You can get a replacement part for an average of 50-70% of the retail value
  • Workmanship Guarantee. If there is an issue due to manufacturing, we'll make it right. 
  • Fit. Cutting edge technology - .1mm accurate 3D scanners, measurement systems, and CNC machines

SSS skid plates are a first purchase for experts. Our skid plates are run by professional racers to your average rider. Our plates have supported some of the toughest terrains out there, this includes failure free finishing at King of the Hammers to your local trail. 

Don't let insurance and a thin, flimsy OEM skid be your first line of defense. An SSS Offroad skid plate will give you the peace of mind you want for your Maverick R. Factory skids do not give you the peace of mind you deserve when you are out doing what you enjoy the most.

Don’t RIDE unprotected! SKID UP with an SSS Off-Road skid plate!

How Much Does Our Maverick R Skid Plate Protect?

A $1,000 Skid Plate Can Protect Up to $12,692 of Maverick R parts

(Costs do not include labor)

INSURANCE SHOULDN'T BE YOUR FIRST LINE OF DEFENSE

A small mistake in your Maverick R can cost a lot of money.
Give yourself a margin for error by upgrading your protection package. 

Let's be honest, everyone makes mistakes driving these machines.
The only question is, how expensive is that mistake?

Insurance Claim = No riding, uncertainty, delays & higher premium.
Pay for protection now, or pay later

OEM material isn't as strong as you think

Is Your OEM Skid Plate Protecting Or Hiding The Damage?

Serious Maverick R Transmission Vulnerability

The transmission is almost completely in-line

No Other Parts Removed, Only the OEM

Is this enough protection for your family?

What is UHMW?

Our customer support is available Monday to Friday: 9am-5pm MT.Average answer time: Text <5 min | Email or Phone within 1-4 hrs

13X

$1,000 Skid Plate protects $12,692

No other aftermarket part protects this much value

Rock Sliders

3 inches of UHMW Rock Sliders is all you need to protect and to increase your riding performance

Can-Am Maverick R Rock Sliders

Buy from the industry leader

Skid Plates Are our Specialty

Founded in 2014

First UHMW skid made in 2009!

Comprehensive

Nearly every side-by-side

Made in Utah

Sourced, Designed, Tested, and Manufactured in the US

Difference Maker

We only produce products that make meaningful differences

Customer service

We pledge that you will only speak to product experts